Cool Hot Rod Ideas

Cool Hot Rod Ideas

Really cool headers. Really cool headers.
deep sump pan and windage tray for a 65-66 GS Skylark. deep sump pan and windage tray for a 65-66 GS Skylark.
Deep sump GS pan and extended pickup, not as nice as the pickups we sell now. Deep sump GS pan and extended pickup, not as nice as the pickups we sell now.
Alternator bracket, not sure about the design? Alternator bracket, not sure about the design?
Low mount AC and alt mounts, mot cars are not going to have room for this setup. Low mount AC and alt mounts, mot cars are not going to have room for this setup.
Low mount AC Low mount AC
Another interesting bracket system. Another interesting bracket system.
Very tight clearance, proper planing would have  avoided this problem. Very tight clearance, proper planing would have  avoided this problem.
Simple alternator bracket. Simple alternator bracket.
My mini generator setup, the Delco unit is hard to mount on the Nail so I came up with this one. My mini generator setup, the Delco unit is hard to mount on the Nail so I came up with this one.
Here I mounted a new small style compressor to the stock 1963-66 AC bracket. Here I mounted a new small style compressor to the stock 1963-66 AC bracket.
Simple and it works. Simple and it works.
Before mini starters! we did this about 30 years ago, a 401 in a 51 Ford, easy swap with a mini starter but back then we put a Ford starter under the engine! it worked for 20 years! Before mini starters! we did this about 30 years ago, a 401 in a 51 Ford, easy swap with a mini starter but back then we put a Ford starter under the engine! it worked for 20 years!
Look at this sweet clutch setup, Ford top loader with Jeep shifter, That is a 53 322, see the hole in the block to set timing and 2 extra bell housing bolts? Look at this sweet clutch setup, Ford top loader with Jeep shifter, That is a 53 322, see the hole in the block to set timing and 2 extra bell housing bolts?
This is a 54-56 Buick with a 401-425. This is a 54-56 Buick with a 401-425.
Lots on cool stuff here, a 322 with later heads. Lots on cool stuff here, a 322 with later heads.
interesting engine mounts? interesting engine mounts?
MSD fuel injection adapted to a 56 322 intake. MSD fuel injection adapted to a 56 322 intake.
Here is my roadster with a Chrysler alternator, simple bracket. The problem I had was charging enough at idle. Here is my roadster with a Chrysler alternator, simple bracket. The problem I had was charging enough at idle.
Blown with a 471, see  brackets. Blown with a 471, see  brackets.
Another picture of the 471 blown Buick, see nice alternator bracket. Another picture of the 471 blown Buick, see nice alternator bracket.