↓

Nailhead Buick

Home Menu ↓
Skip to primary content
Skip to secondary content
  • Home
  • Buick Parts
    • AIR CLEANERS and BREATHERS
    • Aluminum Accessory Parts
    • Brackets: Alternator, Generator A.C. P.S.
    • Cam Shafts, Timing Chains
    • Cooling System Parts
    • Covers: Valley And Plug
    • Covers: Valve
    • Dampners/Balancers and Pulleys
    • Drive Line And Differential
    • Engine Rebuild Parts
    • Exhaust Manifolds & Headers
    • Flywheels & Flexplates, Flywheel Covers
    • Fuel Pumps and Filters
    • Gaskets & Seals
    • Hardware, Bolts, and Studs
    • Heating and Air Conditioning
    • Ignition, Distributors
    • Intakes, Carburetion
    • Mounts: Engine & Transmission
    • Oil Pumps, Oil Filters, Oil Pans
    • PCV Kits, Grommits & Breathers
    • Rocker Arms & Pushrods
    • Starters
    • Suspension Parts
    • Timing Chain Covers
    • Transmissions
    • Transmission Adaptors & Bell Housings
    • Valves, Valve Springs
    • Valve Covers
    • Valley And Plug Covers
    • Water Pumps
  • Tech Info
    • How I Got Hooked on Buicks
    • Parts is Parts?
    • ST300 and ST400 Wiring Instructions
    • Transmission Swaps & Modifications
    • Nailhead Engine Swaps
    • Nailing Down the Buick Nailhead
    • Induction/Carburetion
    • 15 Most Common Mistakes
    • Nailhead Speed Secrets
    • Cooling Problems
    • Excessive Oil Consumption Causes
    • Ignitions & Distributors
    • Engine Vibration Problems
    • Buick Camshafts
    • Oiling Problems
    • Rebuild or Refresh Your Engine?
    • How to Know What Size/Year Nailhead You Are Looking At
    • What is the Best Nailhead Engine for You?
    • Bolts, Studs, proper placement and use
    • Gaskets and Sealers
    • Some Magazines/Books we have contributed to
    • 264-322-364-401-425 bolt torque spec’s
    • Buick V8 Firing Order + Plug Wire Placement
    • Alternator Conversion for pre-1961 Buicks
    • 215-300-340 Tech Info
    • How to install a rope seal correctly
    • Fixing the Offenhauser Intakes
    • What you get with our engine rebuilding service.
    • Oils and Fluids
    • Suspension
    • Install rubber rear main seal — special instructions
    • Newer Carburetor on 1953-1963 Buick cars with Dynaflow
    • ST300 transmission info
    • Upgrades and Boring Limits
    • How to setup multiple carburetors
    • Cylinder Head Info ..
    • Installing An AC Compressor On Your Nailhead
    • Should you flush your engine to remove sludge?
    • Do I need a PCV system?
    • Lastest Dyno Results
  • Galleries
    • Martin Family Rides
    • Buick Legends and Hot Rod Heroes
    • Customer Cars
    • Engine Rebuilding
    • Cool Hot Rod Ideas
    • Pictures of Rare Buick Speed Parts
  • Miscellaneous
  • Caddy Hot Rod Parts
  • About Us
    • Our Shop & Services
  • Customer Testimonials
  • Contact Us

Valley And Plug Covers

Valley and Plug Covers

Valley cover with PCV and filler tube, has baffles. Beautifully polished. All nailheads 295.00 to 425.00
Valley cover with PCV and filler tube, has baffles. Beautifully polished. All nailheads 295.00 to 425.00
Flat style valley with baffle, PCV and filler tube.  Fits all nailheads 175.00
Flat style valley with baffle, PCV and filler tube.  Fits all nailheads 175.00
Baffle for PCV on 260.00 priced valley.
Baffle for PCV on 260.00 priced valley.
Plain valley cover, fits all nailheads. 140.00 raw and 215.00 polished.
Plain valley cover, fits all nailheads. 140.00 raw and 215.00 polished.
Aluminum finned valley cover, fits a Nailhead engines 264-322-364-401-425   .. 95.00
Aluminum finned valley cover, fits a Nailhead engines 264-322-364-401-425 .. 95.00
Polished flat style finned aluminum valley pan cover.. Fits all Nailhead engines.. 125.00 ... made in USA
Polished flat style finned aluminum valley pan cover.. Fits all Nailhead engines.. 125.00 ... made in USA
New cast aluminum valley cover, this is a flat style but is recessed into the block like the stock valley pan, fits 364-401-425 only..  125.00 .. Fits all the intakes including the factory dual quad.
New cast aluminum valley cover, this is a flat style but is recessed into the block like the stock valley pan, fits 364-401-425 only.. 125.00 .. Fits all the intakes including the factory dual quad.
Special Valley Cover for the factory 2-4 intake, there are CNC'ed for proper clearance.. 375.00
Special Valley Cover for the factory 2-4 intake, there are CNC'ed for proper clearance.. 375.00
Here is the factory 2-4 intake with our machined valley cover.
Here is the factory 2-4 intake with our machined valley cover.
Original plug covers in different price ranges depending on condition, contact us.
Original plug covers in different price ranges depending on condition, contact us.
Plug covers, fit most nailheads where brackets do not interfere, 265.00 polished. 150.00 as cast
Plug covers, fit most nailheads where brackets do not interfere, 265.00 polished. 150.00 as cast
Beautiful repro Fenton plug covers, 135.00
Beautiful repro Fenton plug covers, 135.00
Stock 1963-66 401-425 valley cover, I have all years, call.
Stock 1963-66 401-425 valley cover, I have all years, call.
Special brackets to install plug covers on 1957-66 364-401-425 heads, requires 4 studded head bolts. 35.00
Special brackets to install plug covers on 1957-66 364-401-425 heads, requires 4 studded head bolts. 35.00
As Cast 275.00 plus shipping for all nailheads.
As Cast 275.00 plus shipping for all nailheads.
Here are the plug cover brackets installed, ready for the plug covers on the 1957-66 Nailheads.
Here are the plug cover brackets installed, ready for the plug covers on the 1957-66 Nailheads.
High grade plug cover stud set for 53-56 264-322 engines. 24.00
High grade plug cover stud set for 53-56 264-322 engines. 24.00

Ordering Information

You can call us at 530-272-1564 to order an item from our catalog, or request that we find a part for you. You can use the SEARCH function at the top of any page to find an item.

All shipping prices listed are for the lower 48 states of the USA. We do ship parts to Canada, most of Europe, New Zealand, and Australia.

You may notice that most used parts are not priced because our used parts inventory changes daily. Please contact us for current prices and availability of the part you need. We also have many parts that are not listed in this website, so if you don't see what you need please ask. Thank you . . . Russ

© 2013 Nailhead Buick
↑